Category: Photography

Art Gallery in the Living Room

Samsung Frame TV wall mounted over a hand made TV stand. Over 1000 of my own personal photos optimized for 4K on the hard drive cycling through.

The TV stand is made with a sapele top, a mixture of red and white oak for the main frame of the stand, cherry door faces with pine accents and pearls in the center. The TV stand also has WIFI enabled LED lights in the console itself which projects behind and below the top that can be turned on and off, colors changed and brightness as well via an app (Sylvania Flex LED lights) and is turned on by a wireless switch.

CNC Upgrade

Custom made CNC router upgrade made with linear rail and 80/20 extruded aluminum. 3/4″ Plywood base which is easily replaced as it gets used. Custom E-stop, webcam, LED lighting, time lapse camera, and plaque.

Below is a video of the z-axis calibration with surface touch plate.

Video of the surface touch test after touch plate calibration.

Video of the homing sequence, moving the z-axis quickly until it hits the switch, then moving off, then moving slowly until it hits the switch for accuracy, and then moving off. The process is repeated for x and y axis movement at the same time.

Test on accuracy of the system moving 40units (each mark on the ruler was 0.5mm so total of 20cm)

Test cut with vacuum.

Lemaire Channel and Print

 

Scaled down image.  Original image is a composite stitched image from 60 images.  Total image size is greater than 1000 megapixel.
 

 
Unboxing the print
Fully unrolled

Designing the box to stretch the canvas over.
 

Support posts
 

Stretching the canvas.
 
 

 
Edge detail

Final stretched print
 
 

Print Detail
 

 
Final hung photo.  Final print dimensions 72″x25.7″

Wire Tree Light

 
The tree was made with 120 strands of copper, and copper coated aluminum wires.
Lighting was added with coated copper LED string lights.
Base was made from Red Oak and LEDs powered by 3 AA batteries with a switch at the back.
Bottom Plate to house the wires is made out of Acrylic.
Photos were taken with a Canon D60.

New York City 3 Panel Print

 
 
This photo has been arranged and optimized for printing.  There are three separate panels. Each panel has print dimensions of 70cm width by 100cm tall which will fit in standard 70x100cm frames.  The photo is available for both matte style printing or glossy.   Other dimensions can be made to order.  All three panels are available together or single panels as well. Please contact me for details.